Hot-dip galvanizing data sheets
Here you will find the latest hot-dip galvanizing data
sheets
Source: EGGA
|
|
1. Processes
- 1.1 Corrosion protection using zinc
- 1.2 The Galvanizing Process
- 1.3 Hot dip galvanizing of small components
|
|
2. Design and Fabrication
- 2.1 Surface Requirements of Steel for Galvanizing
- 2.2 Requirements of steels for galvanizing
- 2.3 Dimensions and weight of the fabrication
- 2.4 Vessels and tubular fabrications
- 2.5 Structural steel fabrications
- 2.6 Sheet metal and wire articles
- 2.7 Using Pre-Galvanized Materials
- 2.8 Avoiding distortion
- 2.9 Welding before hot dip galvanizing
- 2.10 Welding after hot dip galvanizing
- 2.11 Threaded connections
- 2.12 Renovation of galvanizing
- 2.13 Hot dip galvanizing of castings
- 2.14 Localised uncoated areas
- 2.15 Cathodic
protection and the protection of edge
|
|
3. Standards and Quality Assurance
- 3.1 BS EN ISO 1461: Hot dip galvanizing of iron and steel articles
- 3.2 Explanations, comments, information relating to BS 1461
- 3.3 Additional standards relating to hot dip galvanizing e.g. BS 14713
- -
|
|
4. Operations after Hot Dip Galvanizing
- 4.1 Storage and transportation
- 4.2 Finishing and fitting of hot dip galvanized components
- 4.3 Hot dip
galvanizing with organic coatings - duplex systems
|
|
5. Special Applications and Economics of Hot Dip Galvanizing
- 5.1 Hot Dip Galvanized Reinforcement for Concrete
- 5.2 Hot dip galvanized steel in agriculture
- 5.3 The economics of hot dip galvanizing
|
|

